Anti-Slip High Thickness Profiles
The highly customized service offered by CMM allows, based on the specific requirements of each customer, to manufacture anti-slip profiles with a sheet thickness of up to 5 mm.
The high thickness anti-slip profiles made by CMM are distinguished by the wide range of application areas in which they can be used: from the industrial to the architectural sector, each product guarantees stability, safety and adherence.
The tailor-made customization of high-thickness profiles concerns both the type of hole and the usable material. Holes can be machined in round, square and patterned shapes while. Among the advantages of using high thickness anti-slip profiles, we can find:
- Raw and hot dip galvanized steel UNI EN ISO 1461
- Pre-galvanized steel
- Stainless steel
- Aluminum
Among the advantages of using high thickness anti-slip profiles, we can find:
- Increased load-bearing capacity at the structural level: this feature allows to reduce dimensionally the structure or load-bearing framework of such profiles.
- Reinforcement of the mechanical structure of the profile: this quality makes it possible to decrease the oscillatory effect of the profile at the time of treading.
CMM produces different types of high thickness profiles.
GZ5 anti-slip profiles are characterized by good slip resistance. Good for indoor environments due to the not too intrusive texture. The possibility of changing the distance between deformations is also provided.
| Material | Sheet Thickness |
|---|---|
| Raw steel, Hot dip galvanized steel UNI EN ISO 1461 | 1,5/2/2,5/3/4 |
| Pre-galvanized steel | 1,5/2/2,5/3/4 |
| Stainless steel | 1,5*/2* |
| Aluminum | 1,5/2/2,5/3/4 |
| Maximum dimensions 4000x1500 | |
* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.
GZ8 anti-slip profiles are characterized by an excellent slip resistance thanks to the possibility of application on high thicknesses.
| Material | Sheet Thickness |
|---|---|
| Raw steel, Hot dip galvanized steel UNI EN ISO 1461 | 3/4/5* |
| Pre-galvanized steel | 3/4/5* |
| Stainless steel | 1,5*/2* |
| Aluminum | 3/4/5* |
| Maximum dimensions 4000x1500 | |
* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.
ST anti-slip profiles are a solution to those situations where special elements of stability and safety are required, as the densely punched surface provides an excellent grip.
| Material | Sheet Thickness |
|---|---|
| Raw steel, Hot dip galvanized steel UNI EN ISO 1461 | 2,5/3 |
| Pre-galvanized steel | 2,5/3 |
| Stainless steel | 1,5*/2* |
| Aluminum | 2,5/3 |
| Maximum dimensions 4000x1500 | |
* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.
USV anti-slip profiles are characterized by good slip resistance. Also excellent for indoor environments, stairs and outdoor walkways.
| Material | Sheet Thickness |
|---|---|
| Raw steel, Hot dip galvanized steel UNI EN ISO 1461 | 1,5/2/2,5/3/4** |
| Pre-galvanized steel | 1,5/2/2,5/3/4** |
| Stainless steel | 1,5/2* |
| Aluminum | 1,5/2/2,5/3/4** |
| Maximum dimensions 4000x1500 | |
* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.
** Without counterboss on the reverse side.
BS1 profiles are mainly used to construct flatbeds for transporting wheeled and non-rugged vehicles. The possibility of changing the arrangement of deformations and the distances between them is also provided.
| Material | Sheet Thickness |
|---|---|
| Raw steel, Hot dip galvanized steel UNI EN ISO 1461 | 1,5/2/2,5/3 |
| Pre-galvanized steel | 1,5/2/2,5/3 |
| Stainless steel | 1,5*/2* |
| Aluminum | 1,5/2/2,5/3/4 |
| Maximum dimensions 4000x1500 | |
* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.
BS2 profiles are mainly used to construct flatbeds for transporting wheeled and non-rugged vehicles. The possibility of changing the arrangement of deformations and the distances between them is also provided.
| Material | Sheet Thickness |
|---|---|
| Raw steel, Hot dip galvanized steel UNI EN ISO 1461 | 1,5/2/2,5*/3* |
| Pre-galvanized steel | 1,5/2/2,5*/3* |
| Stainless steel | 1,5*/2* |
| Aluminum | 1,5/2/2,5*/3*/4* |
| Maximum dimensions 4000x1500 | |
* CMM reserves the right to assess feasibility on a case-by-case basis depending on the size and materials of the panels to be produced.
